I
IPC Tester Kamera
Offline
në MerrJep që nga 2024
Publikuar:
Qer 28 2017
05:29
IPC Tester - Kamera
HikVision
Dahua
7 inch 1024x600touch screen, easy to operate.
ONVIF IP camera video testing.
Compatible with H.264/MPEG4/MJPEG IP cameras, such as Dahua, HIKVISION, and ACTI.
Built in Wi-Fi: receives video from wireless cameras or ONVIF cameras connected to the network. HDMI signal output，supports up to 1080P.
Analog camera video display.
Auto adapts and displays the video in NTSC/PAL formats.
Supports more than 30 protocols such as PELCO-P, PELCO-D, and SAMSUNG.
Video image digital zoom to view the image in greater detail.
Snapshot function allows you to save the current image as a JPG file in the SD card.
Video recording and playback.
LED Flashlight.
4GB Micro SD card included.
LCD screen with adjustable brightness/contrast/color/saturation.
Enhanced Color bar generator: PAL/NTSC multi-system color bar video generator (Eight-system switchable, transmit/receive eight-system colorful images).
PEAK video signal level, SYNC signal level, Color burst chroma level measurement: Test video signal attenuation
Cable tracing by sending an audio signal.
This enables the blue cable tracer to find the connected cable from a bundle of cables with an audio tone. Page.2.
Ping test: PING is the most conventional network debugging tool; it is used for testing if the connected IP camera or other network equipment’s Ethernet port is working normally and the IP address is correct.
In digital IP surveillance applications, if the IP camera’s IP address is not known; the device cannot be used.
An IP address scan can quickly search for the connected IP camera or other network device’s IP address.
The PoE voltage test can test for PoE voltage when a POE switch is supplying POE power to an IP camera.
Cable test: Tests LAN cable sequence of wires.
Supports RS232/RS485, The Baud Rate is adjustable from 600 ～ 115200bps.
PTZ protocol analysis: Control protocol commands are displayed to check RS485 transmission.
PTZ control: Pan, tilt & zoom, focus adjustment, IRIS Open/Close and set preset positions.
DC12V 2A output power for cameras.
PoE power output supplies power for PoE cameras.
DC5V 2A power output for USB charging (No USB data exchange, voltage only) Audio input and output tests.
Outputs an audio signal.
7.4V 48.1Wh Battery. Remaining battery charge indicator.
Dahua
7 inch 1024x600touch screen, easy to operate.
ONVIF IP camera video testing.
Compatible with H.264/MPEG4/MJPEG IP cameras, such as Dahua, HIKVISION, and ACTI.
Built in Wi-Fi: receives video from wireless cameras or ONVIF cameras connected to the network. HDMI signal output，supports up to 1080P.
Analog camera video display.
Auto adapts and displays the video in NTSC/PAL formats.
Supports more than 30 protocols such as PELCO-P, PELCO-D, and SAMSUNG.
Video image digital zoom to view the image in greater detail.
Snapshot function allows you to save the current image as a JPG file in the SD card.
Video recording and playback.
LED Flashlight.
4GB Micro SD card included.
LCD screen with adjustable brightness/contrast/color/saturation.
Enhanced Color bar generator: PAL/NTSC multi-system color bar video generator (Eight-system switchable, transmit/receive eight-system colorful images).
PEAK video signal level, SYNC signal level, Color burst chroma level measurement: Test video signal attenuation
Cable tracing by sending an audio signal.
This enables the blue cable tracer to find the connected cable from a bundle of cables with an audio tone. Page.2.
Ping test: PING is the most conventional network debugging tool; it is used for testing if the connected IP camera or other network equipment’s Ethernet port is working normally and the IP address is correct.
In digital IP surveillance applications, if the IP camera’s IP address is not known; the device cannot be used.
An IP address scan can quickly search for the connected IP camera or other network device’s IP address.
The PoE voltage test can test for PoE voltage when a POE switch is supplying POE power to an IP camera.
Cable test: Tests LAN cable sequence of wires.
Supports RS232/RS485, The Baud Rate is adjustable from 600 ～ 115200bps.
PTZ protocol analysis: Control protocol commands are displayed to check RS485 transmission.
PTZ control: Pan, tilt & zoom, focus adjustment, IRIS Open/Close and set preset positions.
DC12V 2A output power for cameras.
PoE power output supplies power for PoE cameras.
DC5V 2A power output for USB charging (No USB data exchange, voltage only) Audio input and output tests.
Outputs an audio signal.
7.4V 48.1Wh Battery. Remaining battery charge indicator.
Transport i sigurt me NPost
Pagesa pas kontrollit të mallrave
Dërgesë direkte
Blej tani
Transporti me "NPost", nga: EUR
Blej tani
Transporti me "NPost", nga: 2 EUR
Transport i sigurt me NPost
Pagesa pas kontrollit të mallrave
Dërgesë direkte